Performance Probe-The Ford Probe Forums

You will only get an error code if you unplug the stock boost controller

My probe gt is far advanced than all. I use a Greddy electronic profec controller. I recommend starting out with a basic manual controller. I use a custom designed chip. Parts can be hard to find, fordprobeparts.com can get parts, if you need a turbo they may be able to help , just send them an emai...

Easy and cheap to do.
1. Find retra fuse in your fuse box under the hood.
2. Get some male connectors that look like the fuse connector terminals, crimp them onto a wire and heatshrink.
3. Attach wires to momentary button, run all the wires, test it out, your done.

This VIS Racing Z1 Boxer Body Kit 89fdpro2dz1-001.jpg VIS is widely renowned as the most quality carbon fiber hood manufacturer in the industry. Their fiberglass products (such as their body kits) also hit the mark since many of the same processes are used. One of the best kits for a 1st gen probe.

Kit inspired by Back to the Future 2

For megasquirt you need to modify the distributor to work, not plug and play. thanks to the topic over at Mx6.com Modifying the turbo distributor. For Megasquirt, we need a RPM input. The simplist way to achive this input on the turbo engine, is using the factory VR sensor and trigger wheel. BUT, in...

Hye-Dra-Cyl L.L.C. Big Brake Kit This kit has many options. This kit features the following parts; 12.2" Rotors (0.81" thick with 32 straight cooling vanes standard) 4 Piston Racing Brake Calipers (major manufacturer) Braided Stainless Steel Brake Lines Brake Pads (for street or Solo II use) Mountin...

REIDSPEED Big Brake Kit This kit is using rotors from a 1995 Mitsubishi 3000 GT VR4 twin turbo, with the center hole bored out to 2-7/8″ Calipers (Millenia S dual piston front calipers) Brake pads (for stock Millenia S front) And custom made Caliper brackets. stock-vs-reidspeed-bbk-300x225.jpg big-b...

Well there are many opinions on what could be the best upgrade for for your front brakes on your 1st gen probe, I plan on just listing what is out there and available at the time of this post for your probe. Mazda 6 Brakes, bolt on... You can buy these parts from just about any auto part resource to...

Bypassing Factory Amplifier If you'd prefer to bypass the factory amplifier, purchase bypass harness Metra® 70-5513 harness from ebay 70-5513_1.jpg Push the front passenger side seat all the way forward. Remove the plastic screw tabs from the two covers at the rear of the front seat tracks and remov...